nomagic

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== command z ======

**Meaning:** Remove a type breakpoint or watchpoint starting at address 'address' of kind 'kind'.

Implementation notes: A remote target shall return an empty string for an unrecognized breakpoint or watchpoint packet type. A remote target shall support either both or neither of a given ‘Ztype…’ and ‘ztype…’ packet pair. To avoid potential problems with duplicate packets, the operations should be implemented in an idempotent way. 

===== software breakpoint =====

**Format:** ‘z0,addr,kind’

**Meaning:** Remove a software breakpoint at address addr of type kind. 

The kind is target-specific and typically indicates the size of the breakpoint in bytes that should be inserted. E.g., the ARM and MIPS can insert either a 2 or 4 byte breakpoint. Some architectures have additional meanings for kind; if no architecture-specific value is being used, it should be ‘0’. kind is hex-encoded. 

**Reply:** <code>OK</code>

===== hardware breakpoint =====

**Format:** ‘z1,addr,kind’

**Meaning:** Remove a hardware breakpoint at address addr.

A hardware breakpoint is implemented using a mechanism that is not dependent on being able to modify the target’s memory. 

The kind is target-specific and typically indicates the size of the breakpoint in bytes that should be inserted. E.g., the ARM and MIPS can insert either a 2 or 4 byte breakpoint. Some architectures have additional meanings for kind; if no architecture-specific value is being used, it should be ‘0’. kind is hex-encoded. 

Implementation note: A hardware breakpoint is not affected by code movement. 

**Reply:** <code>OK</code>

===== write watchpoint =====

**Format:** ‘z2,addr,kind’

**Meaning:** Remove a write watchpoint at addr. The number of bytes to watch is specified by kind. 

**Reply:** <code>OK</code>

===== read watchpoint =====

**Format:** ‘z3,addr,kind’

**Meaning:** Remove a read watchpoint at addr. The number of bytes to watch is specified by kind. 

**Reply:** <code>OK</code>

===== access watchpoint =====

**Format:** ‘z4,addr,kind’

**Meaning:** Remove an access watchpoint at addr. The number of bytes to watch is specified by kind. 

**Reply:** <code>OK</code>